Category Archives: Design

Why Australia Needs to Invest in Future Skills for a Thriving Economy

St. Joseph, Michigan, USA, 2022-Jun-17 — /EPR INDUSTRIAL NEWS/ — As our world becomes ever more technologically advanced, so the requirements for skills are undergoing a dramatic shift. While there has historically been a fear within workforces that computers and robotics will reduce the need for humans to carry out tasks, the opposite is proving to be the case.

Instead, automation is removing the need for humans to carry out tasks that are repetitive and boring, and replacing this with an increasing level of non-routine cognitive tasks. Rather than reducing the number of jobs on offer, tech is causing a shift that requires very different skills from workers.

With this comes a challenge for future investment into the skills that will be in demand in the upcoming years and decades.

The Skills that are Driving Economic Growth

Since before the Industrial Revolution it’s fallen to humans to carry out multiple repetitive tasks that have driven economic growth. Although machines have now taken over much of this element, this has created many other higher order and digital openings that demand an increased level of human expertise in order for an economy to advance. The issue with this is that it’s leading to a shortage of those adept to fill the roles – something that needs to be addressed now if we’re to avoid a dramatic skills shortage in the near and medium-term future.

The so-called STEM skills of science, technology, engineering and mathematics underpin what’s needed to drive the circle of elements that are needed for the future. This circle is made up of the following:

  • Future skills
  • Innovation
  • Thriving economy
  • Jobs
  • Solving social, environmental and economic challenges.

These 5 linked elements are crucial for future economic growth, the well-being of the population and addressing environmental issues, such as disease, food and water supplies alongside climate change.

STEM skills aren’t solely limited to the disciplines mentioned above. Instead, a cross disciplinary aspect is what will be needed to solve many of the quandaries that face future generations. Education is key to developing the critical thinking and capabilities that will arm today’s children and young adults with the skills to solve many of today’s environmental issues as well as ensuring that Australia remains a player on the global stage.

Future predictions say that by 2030 it’s expected that the amount of time workers spend solving problems will double, with more than 77% of their time using mathematical and scientific skills.

STEM Education will Drive the Future Workforce

The shift that’s come from technological change means that going forward virtually everyone is going to need at least a basic level of STEM skills. This will, of course, be spearheaded during mandatory education for those of school age, but also through upskilling of those already in employment.

While this will represent significant cost – it’s been estimated at around $600 billion from 2015 to 2030 – it’s also bringing about economic gain. While this might not be as much as the cost of education in the short term, in the medium to long term this on-going expenditure is essential for a future thriving Australian economy.

Manufacturing and engineering are two examples that are representative of current investment at both local and national scale. Australia’s once world-leading manufacturing industry was allowed to reduce to a mere shadow of its glory days. Thankfully, and with substantial government investment, this is beginning to be turned around.

This, along with strategic education of the current and future workforce, is exactly what’s needed to ensure that our country once again becomes a force to be reckoned with.

Precision engineering and CNC machining providers, SixDe, are at the forefront of this new way of working. Not only has the company invested into its workforce and capabilities, but it provides local WA businesses with an expert supplier in their own back yard.

Discover what makes SixDe stand out from the crowd at https://sixde.com.au and get in contact to discuss your requirements.

Jason De Silveira
Managing Director – SixDe
https://sixde.com.au/

Founder and director of specialist manufacturing and engineering companies for both, SixDe and Nexxis Pty Ltd. Jason has over 20 years’ project management experience on installations, commissioning and start-ups in Australia, Singapore, Thailand, Kuwait, Ghana and Dubai.

SixDe, a Nexxis Company, is a 450m2 locally owned CNC machine shop that delivers manufacturing, rapid prototyping, tooling, and engineering solutions to a variety of Australian industries. Its bespoke precision machining service has delivered competitive and cutting-edge solutions for mining, oil and gas, construction and building companies in Australia and overseas.

Haizol unveils new digital platform

LONDON, 17-Sep-2021 — /EPR INDUSTRIAL NEWS/ — Haizol, an industrial data and engineering manufacturing service, have launched a brand new interactive digital platform. The new site is a user friendly portal where customers can get instant access to quotes for metal and plastic custom part manufacturing. Buyers and engineers worldwide can access a host of information on manufacturing, outsourcing, and suppliers in China, as well as quality assurance and assistance with design and prototyping.

Haizol is innovating the path to a new age in manufacturing. With technology at the centre of their efforts, they facilitate access to high-quality machine parts, component assembly, and product development, manufacturing to customers across the world.

A one stop sourcing solution that provides instant manufacturing services to original brands, private labels, distributors, subcontractors, system integrators, startups, value-added resellers and patent creators worldwide. They provide end to end manufacturing services, alongside dedicated consulting and project management.

Haizol’s manufacturing processes include Prototyping, Molding, Stamping, CNC Machining, Casting, Fabrication and more. Such comprehensive manufacturing capabilities allow Haizol to meet the needs of many industries across a wide range of product categories, including Automotive Parts & Equipment, Aerospace, Electrical Equipment, Electronics, Design & Engineering, Fabricated Metals, Medical Supply & Equipment, Machinery & Tools, Packaging, Toys, as well as general consumer goods.

Since its inception in 2015, HAIZOL Online has enthusiastically awarded multiple rounds of committed financial investment from the world’s top establishment and financial institutes such as Haier, Woofoo Capital, Eastern Bell Capital, Stala Capital and Hongtai Capital Holdings. Their clients include MicroPort, Roche, Siemens, Haier, Zeiss, Whirlpool, Rocker, and Hybrid Racing.

For more information or to learn more, head over to their new website at www.haizolglobal.com

SOURCE: EuropaWire

New Online Deck Designer Wowing Pontoon Boat Owners Nationwide

New Paris, Indiana, United States, 2019-Oct-15 — /EPR INDUSTRIAL NEWS/ — Veada Industries recent relaunch of the company’s website focused on Boat Seats and Boating Accessories included the introduction of Veada’s all new, Pontoon Boat Deck Designer application tool.

The drag and drop designer application allows users to customize their pontoon boat deck with over 20 different pieces in a variety of seating sizes, shapes, features, and color options. A Veada representative said, “We’re already getting positive reviews on the boat seat Deck Designer tool. It gives boat owners the ability to customize the planner to their boat’s length, width and door arrangement, then easily drag and drop the individual pieces to the deck. They can then can rotate and position each piece to visualize how everything will look and fit before they buy.”

The company collaborated closely with their web developers at Precept Partners in redesigning the website and creating the Deck Designer software. Precept manager, Stephen Antisdel said, “We paid particular attention to making the Deck Designer tool both intuitive and fun to use, with instant pricing calculations as each piece is added to the user’s virtual boat deck.”

Veada’s redesigned website also features a wide variety of helpful information on installing boat seats, boat seat cleaning, and a marine upholstery guide in the FAQ section, along with fishing boat seats, helm boat seats, seat pedestals, boat cup holders, marine vinyl upholstery, tent and camper coverings, plus payment options that includes Free Shipping offerings and Free Fabric Samples.

The company also offers free marine vinyl samples sent on request. A summary of applications and helpful tools for all boat owners:

https://veada.com/deckdesigner
https://veada.com/sample-request.html
https://veada.com/about-us/free-shipping.html
https://veada.com/about-us/seeit.html
https://veada.com/pontoon-boat-seats.html
https://veada.com/pontoon-boat-seats/clipper-boat-seats.html
https://veada.com/pontoon-boat-seats/regatta-boat-seats.html
https://veada.com/boat-seats.html
https://veada.com/boat-seats/helm-seats.html
https://veada.com/boat-seats/fishing-boat-seats.html
https://veada.com/boat-seats/boat-consoles.html
https://veada.com/boat-seats/pedestals-hinges.html
https://veada.com/boat-accessories/marine-vinyl-upholstery.html
https://veada.com/boat-accessories/boat-cup-holders.html
https://veada.com/boat-accessories.html
https://veada.com/about-us/cleaning.html
https://veada.com/faq.html
https://veada.com/faq/ask-question.html

Via EPR Network
More Industrial press releases

Study: Europe automotive headliners market revenues to witness a 7.5% CAGR through 2026

DUBLIN 2, Ireland, 16-Oct-2018 — /EPR INDUSTRIAL NEWS/ — The broader disruption in the automotive sector is rubbing off on the Europe automotive headliners market, as vehicle interior air quality (VIAQ) adds to the litany of factors that influence buyer behavior. The growing consumer emphasis on interior air quality isn’t lost on component suppliers and OEMs. Incorporation of low-VOC materials and modular designs is gaining ground in the US$ 6.5 million Europe automotive headliners market, according to Fact.MR’s new study.

The Fact.MR study maintains an optimistic long-term outlook on the automotive headliners market in Europe. The study projects revenues to witness a 7.5% CAGR through 2026, with Western Europe at the forefront of sales and innovation. The lucrativeness of Europe’s automotive headliners market is likely to create a fair share of opportunities, as well as challenges for OEMs and component suppliers in the region.

Request a Sample 

https://www.factmr.com/connectus/sample?flag=S&rep_id=414

Europe’s preeminence in the global automotive landscape is not limited to high production and exports alone – the region leads the way for enacting stringent emission regulations and their implementation. “Automotive headliner manufacturers can expect institutions like ACEA and VDA to focus inward, leading to stringency in VIAQ regulations,” says Nandini Roy Choudhury, Senior Consultant at Fact.MR. “Considering the fact that Europe exports a sizable number of vehicles to Asia Pacific, where most of the action is taking place, European OEMs and aftermarket suppliers also need to comply with the domestic regulations, such as the Guobiao and JAMA,” adds Ms. Roy

Growing Adoption of Low-VOC Materials in Manufacturing Automotive Headliners 

According to Fact.MR’s study, a combination of global and region-specific factors will influence Europe’s automotive OEMs and aftermarket players to invest in low-VOC components. The transition of headliners from a simple covering to an integrated platform for vehicle peripherals has created the need for design innovation. The challenge to improve VIAQ has also led to experimentation with new materials, ranging from thermosets to water-based adhesives.

Know the methodology behind the report

https://www.factmr.com/connectus/sample?flag=RM&rep_id=414

“The evolving consumer demand is multipronged – it is not going to impact only a specific set of players in the supply chain, but its effects are being felt across the spectrum. Unwavering focus on cabin air quality is driving adhesive companies to innovate, bringing recyclable and biodegradable raw materials to the forefront,” adds Ms. Roy.

Germany leads the Europe automotive headliners market, accounting for over one-fourth revenue share in 2017.

Players in Germany’s automotive headliner supply chain are reliant on the broader prospects of the automotive landscape, which has been encouraging in the last couple of years.

According to Germany’s Federal Motor Authority (KBA), Germany’s new car sales reached 3.44 million in 2017, witnessing an increase of 2.7% over the previous year. German headliner and adhesive manufacturers were also supported by positive momentum in Asia Pacific, where new car sales have created significant opportunities. “Germany is not only the leading production and sales market in Europe, but also a key exporter of cars and LCVs. We can expect Germany to take the lead in this new era of flexible, sustainable, and cost-effective headliners and other interior components,” opines Ms. Roy.

The European automotive headliner market may well be dominated by Germany, but France and UKclosely follow suit. The strength of the triumvirate can be gauged from the fact that these three markets collectively held a revenue share of over 65% in 2017. Automotive headliner sales in these three top markets are driven by encouraging sales in compact and mid-sized cars.

The design innovation and incorporation of new materials in headliners and interior parts manufacturing is likely to remain concentrated in the OEM landscape. “Aftermarket sales account for less than 30% share of the European automotive headliner market, so the onus is on OEMs to take the lead,” concludes Ms. Roy.

The report is available for direct purchase at  

https://www.factmr.com/checkout/414/S

SOURCE: EuropaWire

MTS Russia leveraged iBwave Design’s planning, propagation and capacity modelling features to deliver one the largest deployments of Massive MIMO in Europe to date

MONTREAL, Canada, 06-Jul-2018 — /EPR INDUSTRIAL NEWS/ — iBwave, the global standard for designing multi-technology in-building networks announced today that MTS, the leading telecommunications group in Russia, has successfully used iBwave Design to plan, design, deploy and manage modern high density and high capacity wireless networks for the 2018 Soccer tournament.

One of the main challenges during a major event like this is to be ready for the massive data demands put forward by excited fans using multiple devices in a stadium’s complex environment. To enable a fast, reliable fan experience during the 2018 Soccer, MTS Russia leveraged iBwave Design’s planning, propagation and capacity modelling features to quickly deliver one the largest deployments of Massive MIMO in Europe to date. iBwave Design was used to successfully plan and deploy high capacity networks for the following stadiums and surrounding areas: Luzhniki Stadium, Moscow (capacity: 80,000), Spartak Stadium, Moscow (capacity 45000), Rostov Arena Rostov-on-Don (capacity 45000) and Kazan Arena, Kazan (capacity 45000).

Through iBwave’s ability to design mobile networks in large complex venues such as stadiums, operators like MTS can create the ultimate wireless experiences by meeting the demands of a large number of people at a specific time without compromising on speed and quality. There is no margin for error in such an environment when the service is needed then and there without any disruption. Many players are needed to create this experience and iBwave’s design capability ties this all together. With iBwave on its team, MTS was able to deliver a great end user experience by leveraging design features such as signal and capacity modeling right down to inclined surfaces, complex architecture and body-loss calculations when the stadium is filled to capacity.

“It is always difficult to predict mobile consumer needs in high density, high capacity environments- particularly for a world class sporting event such this, where thousands of sports fans are simultaneously using multiple devices across multiple technologies,” says Seth Roy, Vice President Product Line Management at iBwave. “Based on our experience of connecting major sporting events such as past World Cups and the Olympics, our tools are the ideal choice to prepare for the huge amounts of data requirements during the 2018 World Cup. We are proud to support MTS in this project and extremely excited to be part of the design and deployment of Europe’s largest Massive MIMO experiences”, he added.

More than 3 million spectators are estimated to watch the games live during this month-long event, which is underway until July 15th.

SOURCE: EuropaWire

Express Cleaning Supplies Pressure To The Industrial Washer

Express Cleaning have a full range of cleaning equipment for the commercial and industrial market and they deal with some of the best manufacturers in the market today. Karcher is one of the top names in Pressure Washers and they supply a range that covers form the small householder job to the major industrial equipment. In some cases the item to be cleaned can be brought to a cleaning station where there is a good water supply and an electrical power supply but there are many cases where the item to be cleaned has to be cleaned in situ and the cleaner brought to site and Express Cleaning and Karcher have the ideal piece of equipment for the job.

Express Cleaning Supplies are pleased to promote the Karcher HD801B Cage Industrial Pressure Washer, which has been designed with the industrial or construction industry in mind. The Karcher HD801B Cage Industrial Pressure Washer is an excellent piece of equipment and has been constructed to be able to be taken to the point of operation by mechanical means. The pressure washer is mounted in a large tubular steel cage, which offers fantastic protection against the knocks and bumps suffered in site movement. The cage has a large lifting hook to enable it to be taken around the site by crane or fork lift truck or JCB type machine; it also has two large pneumatic tired wheels so that it can be easily manoeuvred when close to its final destination. This machine is ideal for rugged work and will take the hardship of a large industrial site.

Express Cleaning Supplies is delighted that this machine is powered by the excellent Honda 5.5 Horsepower GX160 engine. This means the machine is self-powered and only requires water on site, which can of course be tanked to site if there is no other way. The engine provides a water supply with a working pressure of 140 bar and a flow rate of up to 650 litres per hour. The machine has a 10 metre high pressure hose to enable flexibility around the work place.

Express Cleaning Supplies notes that the Karcher HD801B Cage Industrial Pressure Washer uses a long spray lance, which is some 550mm in length and works with a triple nozzle. Karcher have designed the triple nozzle to provide either a high pressure pencil jet for spot and difficult small area cleaning, a high pressure fan jet that works with a 15 degree angle and a low pressure 40 degree angle jet. The low pressure jet is very important as it gives the operator the option of using a detergent to loosen the dirt from the desired surface.

This Karcher HD801B Cage Industrial Pressure Washer is a real workhorse in the industry and Express Cleaning Supplies is delighted with the flexibility and reliability of this piece of cleaning equipment. A quick look at the Express Cleaning web site will show just how good the washer can be.
Express Cleaning Supplies are a UK online retailer of commercial cleaning equipment, from simple cleaning products through to durable and tough cleaning machines for day to day jobs.

Via EPR Network
More Industrial press releases

A New Device Prevents Elevator Accidents Result From Moving Elevator With Open Door

FSSG In a nutshell 

FSSG is a patented electrical device installed in series with elevator door locks safety circuit, to detect any by-pass that may result in elevator running with open door, upon detection FSSG prevents elevator “NORMAL” operation and changes elevator control into “SERVICE” mode, thus prevents automatic movement with open door, thus prevents horrific elevator accidents.

How FSSG protect the public riders 
Elevator runs with open doors because of 2 reasons only, either Mechanical or electrical failure, Mechanical failure (machine brake or suspension) that led to elevator runs with open door, has been resolved by the Unintended Car Movement( UCM) protection. the only problem with it, in case of door locks by-pass the UCM is disabled and cannot protect the public.

Electrical failure (door lock by-pass, car switch by-pass) up till now considered to be Human error / unresolved, with the FSSG this problem has been resolved, Human error is not valid any more.

Today’s news, we’ve successfully implemented a new safety method for which, FSSG employs the UCM to creates for the first time in elevator history a comprehensive elevator protection, to ensures that no matter what’s the failure, “this elevator will not run automatically with open door.”

FSSG Description & Functions

  • FSSG is an electric device that connected in series to any safety chain to be monitored, such as landing door locks or car gate switch.
  • FSSG detects any by pass of safety circuit, either intentionally by elevator mechanic or unintentionally by-pass resulting from Short-Circuit in elevator controller or the shaft.
  • FSSG upon detection of such by-pass, switches elevator control into inspection mode. thus prevents accidents results from automatic movement with open door, but allows elevator mechanic to run the elevator under inspection mode.
  • FSSG does not disable the UCM protection during by-pass as it’s distinguish between elevator runs on by-pass, or elevator runs on safety circuit., even though by-pass exist FSSG detects also a single landing door by-pass or car gate switch by-pass, based on car door position, according to international elevator code A17.1 & EN81-20.
  • FSSG is self protected, it detects and alert any attempt to disable / by-pass the FSSG by placing a jumper wire over it.
  • FSSG detect and alert an internal failure of the FSSG
  • FSSG employ the UCM to prevent either mechanical or electrical failure that result with car running with open door.
  • FSSG is easy to adapt to all kinds of existing elevators
  • FSSG is Highly reliable, low cost and easy to install

Do not wait for the next accident act Now, FSSG

Via EPR Network
More Industrial press releases

Lamp Post Extracts The Different Extractor Fan Options

Lamp Post Electrical have built a business supplying a range of good electrical equipment via the Internet at highly competitive prices. The range of their equipment lists is large and varied and represents the best options available for the standard electrical engineer. In the field of electrical extractor fans Lamp Post Electrical is pleased to be able to offer a selection of options, which can be chosen according to the application to which it is intended. In particular the Lamp Post Electrical company have a great range of Manrose bathroom extractor fans specially designed and built for bathroom, cloakroom and toilet use. These fans are all quiet in operation and are virtually silent to the rest of the room, if they make a noise there is something wrong with them.

Lamp Post are pleased to offer the Manrose XF 100PIR Extractor Fan specially built for bathrooms and toilets, this fan will operate on the entry of a person into the room and extract successfully until a fixed time after the exit of the person when a timer will automatically run for a fixed time after the persons exit. This will keep the bathroom extractor fan generally clean and dry and remove all uncomfortable smells as well as the steam from showers or baths. The only problem that the system may have is if copious amounts of wet washing are dried in the bathroom and the fan requires operating to remove the dampness, as the P I R system will have shut the system down long ago.

The Manrose WF 100mm Window Fan with Pullcord is a standard for Lamp Post Electrical as it is a basic fan which fits into the glass in the window where a hole has been cut and the extractor has been fitted. Extraction is simple and correct and the fan is turned on and off by means of a pullcord, this is a positive system that is cheap to install and will work effectively when power is turned on but is reliant on the power being turned on and off manually. Lamp Post realise this is a great extraction fan for use when problems occur and where manual operation is a sensible and secure way of removing the extraction problems. It is no use having a P I R system if the fan shuts down and leaves the problem unresolved.

The Manrose 4 inch Extractor fan with Humidstat – It is a great workhorse fan which can be fitted into the bathroom walls or ceiling so that the gases are extracted through a ducting to the outside of the building. The system works well and the built in Humidistat will keep the fan running when there is a humidity problem and just keep the fan going if a problem is detected.

Lamp Post – http://www.lamppostelectrical.co.uk – is pleased with these options and each has its place as well as the low voltage extractor fan systems, which are now also coming into serious contention in the market place. However Lamp Post Electrical has stocked each system because there are personal choices that people wish to make and each of the systems will work better in a certain environments than some of the others.

Via EPR Network
More Industrial press releases

Express Cleaning Succumb To Pressure For The Karcher HD 5/11C Washer

Express Cleaning Supplies have been supplying high quality pressure washers for a long time and the range covers all different requirements required by households and industry. This range keeps getting better and Express Cleaning Supplies is pleased to promote the newest addition to the range in the form of the Karcher HD 5/11 C Pressure Washer. This new pressure washer is a compact machine with a number of new features that has turned a small machine into an excellent piece of cleaning equipment. Aimed at the lower end of the market this machine is very reasonable priced but has a great workload potential.

Express Cleaning Supplies is pleased with the upright, space saving designed machine, which has a retractable handle that retracts and then collapses to help with storage. This is an ideal machine for the place with little storage space or for the outlet where the machine has to be transported on a regular basis. The overall weight of the Karcher HD 5/11 C Pressure Washer is only 19 kg so single man handling is more than possible.

Operating the Karcher HD 5/11 C Pressure Washer is ideal as the machine produces a flow rate of 500 litres per hour of water at a pressure of 115 bar, uses a standard 240 volt power supply and is powered by a 3 piston axial pump, with hardened steel pistons. This design configuration guarantees a smooth and quiet operation but it is extremely effective and powerful in its cleaning operation. Although quite a small machine Express Cleaning Supplies notes that it is fitted with an excellent chemical metering system, which enables the chemicals and detergents to be added quickly, and accurately at the correct rate. The designers of the Karcher HD 5/11 C Pressure Washer have taken note of the problems with chemical damage to the pressure washer’s pump and have designed the pump with a brass cylinder head to make sure the cylinder head is resistant to the detergent usage.

Express Cleaning Supplies believe that the Karcher HD 5/11 C Pressure Washer is ideal for a range of companies who require regular pressure washer cleaning. The lightness and portability of the machine makes it useful for operations like fleet cleaning where the vehicles are brought in on an “Ad hoc” basis or on a planned basis and can receive a regular washing. The farm or animal shelter is another obvious user where muck and slurry must be cleaned out on a daily basis. This machine will do that job quickly and very well in a very short time. Fish, meat and vegetable markets can be totally cleaned as required with a minimum of fuss and cost. In places where detergents and disinfectants are required the machine can work for long periods between refilling. The overall cost of the machine at less than ?400 means that many companies who might only have irregular but essential usage can afford such a machine. Express Cleaning Supplies welcome any enquires and invite the reader to examine their web site or contact them directly to see if the Karcher HD 5/11 C Pressure Washer is suitable for there operation.

Via EPR Network
More Industrial press releases

I-TECH And KT Web Printing Ltd. Partner To Install The First I-TECH Automatic Register Control System In Canada

Imaging Technologies, Inc. (I-TECH, www.i-technologies-inc.com) I-TECH and KT Web Printing Ltd. (Toronto, Canada) have formed an alliance to install the first I-TECH automatic register control system in Canada. KT Web Printing, a cold-set web printer, has been specializing in printing newspapers and magazines in Toronto, Canada since 1983. I -TECH’s automatic register control system will be installed on KT Web’s existing Ventura 4-High presses beginning in December and will go live in January 2010.

Thomas Kim, President of KT Web Printing Ltd., says, “I-TECH’s impressive software interface, online support and troubleshooting, and almost invisible registration dots compelled us to really examine I-TECH’s advanced system. Their highly competitive pricing and guarantees, as well as their friendly staff, helped make our decision easier.”

Bill Brandenburg, I-TECH’s Senior Vice President of Sales and Marketing, says, “The KT Web partnership allows us an opportunity to provide register motorization on their 4-High’s as well as give them a state-of-the-art productivity solution. Having a Canadian demo facility will also help us in our expansion efforts in the greater North America.”

Imaging Technologies, Inc. and Richner Communications, Inc. (Garden City, NY) also have partnered to put the first I-TECH automatic register control system on the East Coast. The I-TECH closed loop, automatic register control system will be installed on Richner’s existing DGM 430 press in January 2010 and will go live in February. Stuart Richner, President of Richner Communications, Inc., says, “We chose the I-TECH register system after a thorough investigation of the alternatives. The I-TECH system’s advanced technology, ease of use, and nearly undetectable register marks—coupled with its team of dedicated, attentive personnel—gave I-TECH the edge over competing products. The fact that the system is extremely well priced, and offers excellent guarantees and online support, made our decision that much easier.”

Bill Brandenburg, added, “We are excited to have Richner as a partner in this project. Richner will receive lowered make-ready waste and time as well as helping their “Green” profile. At the same time, I-TECH will get another first class demo site to bring in other prospective printers.” Brandenburg also points out that “We now have our equipment on heatset, coldset, and UV presses at newspapers as well as commercial printers. Furthermore, if we combine these two orders with our existing customer base, it gives us 22 webs of register, ribbon, and/or cut-off control on 9 different presses at 6 sites. That’s a pretty impressive record for a company who installed their first system just 18 months ago.”

About Imaging Technologies, Inc.:
Established in 2006, Imaging Technologies, Inc. (I-TECH) provides state-of-the-art machine vision systems for industrial process automation. The company designs and manufactures innovative press automation products that include Automatic Register Control, Ribbon and Cutoff alignment controls. I-TECH’s automation products improve production quality, enable time savings and help operators to reduce waste.

Via EPR Network
More
Industrial press releases

Couture Glass – Breaking New Ground In Large-Scale Glass Tile

GrayGlass www.grayglass.net with over 60 years of experience in the architectural and technical glass fields has spun-off a new company to enter the glass tile industry. GrayGlass recognizing the current economic environment has invested in this new venture to bring style and value to homeowners, builders and remodelers.

Couture Glass is breaking new ground in wall coverings with their remarkably affordable, high style glass tile. Their exquisite large-scale glass tile – Verre Tile has made quite a global impact with tile distributors, architects and designers. Couture Glass debut offerings includes an elegant collection of 3-D large-scale glass tile in sizes ranging f r o m 6″x 12″ to 18”x 24” in a palette of 12 colors f r o m subtle to spectacular and numerous dramatic textures which will compliment any room.

Light dances on the surface of the Riche pattern to create a range of hues f r o m the base color. This dynamic tile will reflect a myriad effect at different times of the day based on how light enters the room and strikes the wall.

Vogue will take your breath away with its multi-dimensional depth that incorporates softness, luxury and beauty. A distinctive feature of this tile is its ‘movement’, which mimics gentle winds caressing sand.

Luxe blankets walls with a gorgeous light-catching bristle effect that glistens and changes color. This eye-catching tile resembles luxurious fur and is a brilliant choice for anyone interested in adorning their walls with elegance.

Feeling reflective? Create the expansion of space while livening up your walls with this modern, versatile mirror tile available in our entire collection of 3-D VerreTile patterns.

This superior quality, TCNA tested, eco-friendly, high style glass tile collection has been created by our design experts with cutting edge tile trends in mind. This combination of style and function will appeal to traditional and modern taste alike. We are extremely sensitive to the current economic times, therefore, we are committed to deliver glass tile with excellent value and durability at a competitive price point that responds to consumer concerns and demands. Private label projects are welcome. Please visit our website to see our stunning collection of glass tile. For more information about Verre Tile by Couture Glass, visit www.coutureglass.com or contact Jennifer Wichard or Chris Vigianno.

Via EPR Network
More
Industrial press releases

Datacraft Solutions, Inc. And Danaher Corporation Announce Strategic Partnership

Datacraft Solutions, Inc., the lean manufacturer’s partner for building cost-effective digital supply chain replenishment networks, has successfully completed the third installation of its lean manufacturing solution for the Washington, D.C.–based Danaher Corporation, a leading lean manufacturer and has finalized agreements to implement in three more facilities over the next three months.

Datacraft Solutions, Inc. And  Danaher Corporation Announce Strategic Partnership

Signum is an automated digital supply chain technology that reduces inventory levels, increases productivity, continually improves process flow and provides realtime, visual and collaborative communication in the supply chain. Signum is delivered securely over the Internet without the need to install and maintain complex, expensive software.

Brian Burnett, the Vice President of the Danaher Business Systems Office (DBSO) and Procurement says, “A key performance indicator we measure across the Danaher businesses is inventory turns. When inventory turns consistently improve, a lot of the right processes are in place. We are excited about our partnership with Datacraft Solutions because they provide us with “low barrier to entry,” state of the art technology with which we can easily standardize across our organization. Datacraft enables us to integrate with our diverse back office systems, so we can leverage our existing processes and technology and move into production, quickly realizing results.”

“Datacraft’s approach is to work with the world’s premiere lean leaders to develop and operate businesses that generate outstanding financial returns”, said Stephen Parker, Datacraft CEO. “Our strategic partnership with Danaher draws on a joint commitment to develop world class inventory supply chain execution systems which yield unprecedented inventory turnover while supporting micro-short customer delivery cycles. This collaboration will be compelling not only for our companies, but also for our industries, our partners and, of course, for consumers”.

For more information on Datacraft Solutions’ products and services for building cost-effective digital supply chain replenishment networks, visit www.datacraftsolutions.com.

Via EPR Network
More
Industrial press releases

MFGmatch.net Helps Companies Get Manufacturing Quotes From Machine Shops

The Industrial Leaders Group announced today the launch of MFGmatch.net, a custom manufacturing marketplace to connect companies with machine shops and contract manufacturers. The company said the new site was launched in response of a serious need for small and medium sized job shops with limited marketing budgets to compete with larger shops with a more dominate online presence.

custom manufacturing

According to Conrad Bailey, spokesperson for MFGmatch.net, the site is designed to help domestic and international machine shops promote their services online while enabling those in the market for custom manufacturing services to submit RFQ’s (request for quotes) directly to national and international manufacturers at . Bailey said the focus of the site is on machined parts, precision components and other custom products constructed in various metals, plastics, rubber, wood and other materials.

“MFGmatch.net was designed to include offerings for all types of services provided by machine shops such as castings, engineering and design, fabrication, forging, woodworking, tool and die making, prototyping, plastic and rubber parts, molding, mold making, metal finishing, precision machining, heat treatment, forging and other custom manufacturing solutions,” said Bailey. He added, “Industrial Leaders created the site because research has shown many smaller shops are in need of a lead generation service they can afford and compete with larger manufacturers that often dominate search engines and other industrial marketplaces on the Web.”

Bailey said there are existing site that charge machine shops as much as $5,000 and up annually for the privilege to access RFQ’s with no guarantee of results in terms of new customers. MFGmatch.net on the other hand is free for both the buyer as well as the supplier. He explained, “It’s a win-win situation for everybody involved because the money saved by the machine shop that would usually be spent on advertising can be passed on to the buyer.”

About MFGmatch.net
MFGmatch is a FREE Custom Manufacturing Marketplace at http://www.MFGmatch.net connecting buyers and suppliers of custom parts, precision components, machined items and other made-to-order products and solutions. The site is the solution to high-priced marketplaces as it’s designed to enable machine shops, contract manufacturers, foundries, engineers and other professionals to post and explore RFQs at no charge.

Via EPR Network
More
Industrial press releases

Custom and Build-to-Spec Workbench Solutions By OnePointe Solutions LLC

OnePointe Solutions LLC (www.OnePointeSolutions.com) announces the launch of a new website, which focuses on 5 core elements of their workbench product: (1) modular workbench design, (2) laboratory solutions, (3) custom workbenches, (4) mobile material handling and instrumentation carts and (5) stainless steel workbench solutions.

The new website showcases their products, but also provides “how to” contact information and a customer support platform that is state of the art and easy to use. The new website displays the company’s high standard of workmanship along with a flexible variety of components and made-to-order specifications. With these new workbench applications, OnePointe Solutions bolsters its position as a top provider of high-performance workstations that can enhance productivity across all industries.

“Our innovative workspace solutions enable our clients to have the ability to maximize space and adjust to workflow, which can translate to sizable savings on real estate costs and an increase in employee productivity,” comments Aaron Boto, CEO of OnePointe Solutions, LLC. The company offers a wide array of materials in their workbench products, including plastic laminate, stainless steel, chemical resistant and ESD laminate, maple block, laboratory grade phenolic and epoxy resin.

In terms of laboratory solutions, OnePointe Solutions has also assembled work tables, wall units, laboratory islands, and even modular carts that are suitable for all laboratories. Mike Triche, Chief Operating Officer for OnePointe Solutions, LLC said, “Customers can now view and search for task specific products right on the website such as microscope tables and heavy duty laboratory workbenches that can withstand the daily demands of their laboratory or technical facility.”

In addition to custom-made workbenches, OnePointe Solutions also provides custom designed technical or laboratory furniture. OnePointe offers a wide range of technology hardware and bench related accessories that can easily integrate into the workstation for optimal performance. Items such as LCD monitors, monitor arms, monitor rails, servers, CPU’s, printers, webcams, TV’s, bin rails, magnifying lamps, special steel drawers, mobile storage solutions and overhead lighting just to name a few.

OnePointe Solutions also provides a variety of stainless steel solutions that are NSF-certified and clean room-ready. Their products are constructed to help their customers meet specific material-handling requirements in the food service and healthcare industries. (food zone certifications like NSF 51, for example). Using stainless steel clean room product that is specifically designed for electronics and healthcare manufacturing companies, OnePointe Solutions provides clean room-ready tables built using solid or perforated tops that can either have a brushed or electropolished finish. Workbenches in this category are made with 14 gauge stainless steel and are alcohol wiped and bagged for shipment.

About OnePointe Solutions, LLC
OnePointe Solutions, LLC (
http://www.OnePointeSolutions.com) is a one-stop shop for technical furniture and custom workbenches. In addition to being a custom manufacturer, the company represents nearly 1,000 technology manufacturers and more than 600,000 products that can be integrated into workbenches and used in laboratories, light or heavy manufacturing, clean rooms, and food and healthcare industries and office environments.

Via EPR Network
More 
Industrial press releases

Welcome to EPR Industrial News

EPR Industrial News is a new blog, part of EPR Network, that is going to be focused on and will be covering the industrial news and stories from press releases published on EPR Network.

EPR Network (EPR stands for express press release) is one of the nation’s largest press release distribution networks on Web. The EPR’s nationwide network includes 12 State based PR sites, one major PR forum and a number of industry specific PR blogs and what started as a hobby on Internet years ago turned out to be a rapidly growing business today. EPR Network is also known as one of the most trusted (human optimized, published, edited and monitored, spam/scam/low quality PR content free) PR sites on the web with more than 10,000 company and individual press releases distributed per month. EPR Network is putting your press releases on top of all major search engines’ results and is reaching thousands of individuals, companies, PR specialists, media professionals, bloggers and journalists every day.

EPR Network has thousands of clients around the world including global 500 corporations like Hilton Hotels, Barclays Bank, AXA Insurance, Tesco UK, eBay/Skype, Emirates, just to name a few. The network’s PR web sites are currently reaching from 150,000 to sometimes 500,000 unique visitors per month while our viral reach could possibly go to as much as 1M people per month through our presence across various social media sites. EPR Network was established in 2004 and as of May 2008 it had more than 800,000 press releases (pages) published on its network.

If you have a press release to be distributed, you can do it over here: press release distribution