A New Device Prevents Elevator Accidents Result From Moving Elevator With Open Door

FSSG In a nutshell 

FSSG is a patented electrical device installed in series with elevator door locks safety circuit, to detect any by-pass that may result in elevator running with open door, upon detection FSSG prevents elevator “NORMAL” operation and changes elevator control into “SERVICE” mode, thus prevents automatic movement with open door, thus prevents horrific elevator accidents.

How FSSG protect the public riders 
Elevator runs with open doors because of 2 reasons only, either Mechanical or electrical failure, Mechanical failure (machine brake or suspension) that led to elevator runs with open door, has been resolved by the Unintended Car Movement( UCM) protection. the only problem with it, in case of door locks by-pass the UCM is disabled and cannot protect the public.

Electrical failure (door lock by-pass, car switch by-pass) up till now considered to be Human error / unresolved, with the FSSG this problem has been resolved, Human error is not valid any more.

Today’s news, we’ve successfully implemented a new safety method for which, FSSG employs the UCM to creates for the first time in elevator history a comprehensive elevator protection, to ensures that no matter what’s the failure, “this elevator will not run automatically with open door.”

FSSG Description & Functions

  • FSSG is an electric device that connected in series to any safety chain to be monitored, such as landing door locks or car gate switch.
  • FSSG detects any by pass of safety circuit, either intentionally by elevator mechanic or unintentionally by-pass resulting from Short-Circuit in elevator controller or the shaft.
  • FSSG upon detection of such by-pass, switches elevator control into inspection mode. thus prevents accidents results from automatic movement with open door, but allows elevator mechanic to run the elevator under inspection mode.
  • FSSG does not disable the UCM protection during by-pass as it’s distinguish between elevator runs on by-pass, or elevator runs on safety circuit., even though by-pass exist FSSG detects also a single landing door by-pass or car gate switch by-pass, based on car door position, according to international elevator code A17.1 & EN81-20.
  • FSSG is self protected, it detects and alert any attempt to disable / by-pass the FSSG by placing a jumper wire over it.
  • FSSG detect and alert an internal failure of the FSSG
  • FSSG employ the UCM to prevent either mechanical or electrical failure that result with car running with open door.
  • FSSG is easy to adapt to all kinds of existing elevators
  • FSSG is Highly reliable, low cost and easy to install

Do not wait for the next accident act Now, FSSG

Via EPR Network
More Industrial press releases

Express Cleaning Supplies Gives Any Carpet The Clean Sweep

Express Cleaning Supplies can supply any cleaning equipment from small to large along with all the proper chemicals required for a good operation and quality cleaning with the equipment involved. This equipment can also be supplied at very competitive prices from a company, which has the experience to deal with all cleaning needs.

Express Cleaning Supplies is pleased to be able to supply the Prochem Blazer GT Truck Mounted Carpet & Upholstery Cleaner to the carpet and upholstery cleaning trade. Prochem manufacture some excellent equipment for all sorts of cleaning work but this piece of equipment is designed to meet the needs of the travelling carpet and upholstery cleaner who needs to be totally self-sufficient.

These days even the householder does not want to be inundated with large portable cleaners which take over the house and for a hotel or office complex this is often totally unacceptable as corridors or working space cannot be clogged up even out of normal working hours. The Prochem Blazer GT Truck Mounted Carpet & Upholstery Cleaner is usually mounted in a typical small van with a side door, the cleaning head is attached to a water and chemical supply hose and also a 2 inch vacuum hose and these are fitted to the Prochem Blazer GT Truck Mounted Carpet & Upholstery Cleaner. These hoses are some 250 feet (75 metres) long and can work long distances from the truck mounted carpet cleaner. Setting up for a job is simple and quick and with an extra water tank fitted the unit is totally self-sufficient.

The cleaning chemicals are added to the supply tanks but there is no need for careful measuring and mixing as the machine is set to mix the chemicals automatically. The machines works with a Briggs and Stratton 2 stroke engine and is therefore not reliant on a local power supply.

Express Cleaning Supplies are delighted with the quality of cleaning of the Prochem Blazer GT Truck Mounted Carpet & Upholstery Cleaner as it is very quick in its operation and very effective. The unit works at a pressure of some 300 to 500 psi unlike the smaller units that work at less than 100 psi. This increased pressure gives a much better cleaning, which is maintained at long distances from the van. Being just a set of trailing hoses allows the operator to move freely throughout the home or building complex and the ability to use many different chemicals allows it a full ability to deal with all the different problems that the operator may encounter. The machine can work continuously with no stops required other than enforced ones, it is also able to clean upholstery exceptionally well so that a complete cleaning operation can be carried out at one time. The Prochem Blazer GT Truck Mounted Carpet & Upholstery Cleaner is a great machine for dealing with large building cleaning as it can reach throughout the building, hoses and gun can be taken up external stairways or through windows to avoid entrance ways and hallways and there is no machine noise inside the building. Express Cleaning Supplies – http://www.express-cleaning-supplies.co.uk – notes that this is definitely a major player in the cleaning game

Via EPR Network
More Industrial press releases

Warranty on Trucks and Trolleys Extended to 10 years by The Workplace Depot

The Workplace Depot is delighted to announce that their range of Fetra trucks and trolleys will now be under warranty for 10 years; previously the warranty was for five years.

Many workplaces rely heavily on trucks and trolleys to move goods around and they can take a heavy pounding from regular, hefty usage. So it may come as a surprise that a company could guarantee the reliability of such an item for an extended period.

Ken Miller, Director of the Workplace Depot explained, “The reason we can give a 10 year warranty is because the equipment is now manufactured at highly efficient production facilities using some of the most advanced precision machinery. The Fetra range of trucks and trolleys are also powder-coated and undergo vigorous shot blasting pre-treatment.”

The new manufacturing process extends the product life as well as keeping the finish in tip-top condition for much longer.

There may be cheaper alternatives in the truck and trolley ranges provided by other suppliers, but buying an inferior item can be a false economy. This type of transport equipment has notoriously high levels of wear and tear, so lower quality equipment may only last a few years and therefore need to be replaced. This wastes both time and money versus the alternative of purchasing a reliable product that is guaranteed for 10 years.

Steve Miller, The Workplace Depot’s Managing Director commented on the quality of the Fetra products, “We are proud of the fact that if any of the Fetra products fail within 10 years, we will replace the whole truck or trolley, not just replace a part. We will of course do this free of charge. Our range is built to last and nothing says this more than a 10 year warranty.”

To view the full range of Fetra manufactured trucks and trolleys, visit the Workplace Depotwebsite.

Via EPR Network
More Industrial press releases