Inspector 3.0 Changes The Face Of RVI Inspection

Perth, WA, Australia, 2021-Jul-26 — /EPR INDUSTRIAL NEWS/ — Inspection tasks are undergoing rapid advancement thanks to Remote Visual Inspection (RVI) tools, like the Elios 2. However, while there are many advantages to such drone inspection (speed, visualisation of hard to reach areas, increased health and safety etc), it also brings with it one significant challenge: 

That of pinpointing the location of defects. 

Unlike traditional inspection, where the defect is determined by the person in front of it, RVI inspection in areas like boilers requires multiple data input to gain an accurate location. This might include the use of maps, blueprints and barometric measurements. This is a complex task. Getting it wrong can have serious implications, the worst of which is undertaking significant effort (AKA time and money) to gain access to repair the defect, only to find you’re in the wrong place. 

Enter Inspector 3.0 

Inspector 3.0 is the newest version of Flyability’s Inspector software, specifically designed to be used with the Elios 2 for indoor inspections. 

This revolutionary data localisation program allows inspectors to create a 3D map immediately following an indoor drone inspection flight. The advantages of this are many, all of which combine to create one thing – significant savings for repair and maintenance tasks. 

  • Accurate defect location in real time: The whole reason for inspections is to identify defects. Being able to pinpoint them immediately after an inspection flight has taken place means efficient action plans can be immediately put in place.
  • Lowered costs: Wholly accurate localisation of a defect in a hard-to-reach asset area allows for exact planning to gain access. Whether this involves scaffolding, digging through dirt, cutting into the asset or any other means of access, it negates the risk of ending up in the wrong location. Such unhappy incidents are common and result in prolonged downtime and the associated loss of revenue.
  • Better communication: Industrial maintenance often includes many different personnel. From inspectors through to maintenance staff, C-suite level and managers, accurate data localisation can assist in helping everyone understand the needs of the inspection data. A 3D map speaks volumes and bypasses much of the requirement to fully understand technical data, therefore aiding comprehension at all levels and improving communication.
  • Improves customer relations: Performing inspections often causes frustration if a customer can’t see a tangible report of defect locations as soon as its finished. The ability to present them with a 3D visualisation straight away is hugely advantageous to customer confidence.

How Inspector 3.0 Works

1. Launch the indoor inspection mission: Using the Elios 2

2. Collect visual data: On the fly collection of data, allowing you to mark points of interest at the touch of a button

3. Create a 3D map: Following the flight, utilise the mapping feature of Inspector 3.0 to create a sparse map of the asset that includes the points of interest detected. This takes between 20-50 minutes to generate 

The Elios and next-generation Elios 2 continue to evolve, along with the software that goes alongside. Such innovations are key to driving down costs and increasing productivity in an ever-competitive marketplace.

Equipment provider, Nexxis, is committed to procuring such technology and providing the unique availability of a dynamic model that allows their customers to take full advantage of tech as it becomes available. 

Head to www.nexxis.com to discover the Nexxis difference, and why they’re becoming the equipment supplier of choice to industries as diverse as oil & gas, petrochemicals, manufacturing and aeronautical.

Royal Caribbean Awards Handling Specialty its Largest Fixed Price Contract in 58-Year History

Hamilton, Ontario, Canada, 2021-Jul-05 — /EPR INDUSTRIAL NEWS/ — To have recently landed a project that can be identified as a company’s largest fixed price contract in its long history is reason enough to celebrate, but when it’s with a corporation who is intimately familiar with your work and company values, that validates an organization’s processes from sales and engineering to manufacturing, installation and service.

Handling Specialty made history in 1995 when it was contracted to produce the underwater stage lift system for Cirque du Soleil at the Bellagio, in Las Vegas. The ‘O’ show continues to perform 2 shows per night after 24 years on the original Handling Specialty lift systems. It is an extraordinary engineering feat from a world class SME located in the heart of Niagara, in Grimsby, Ontario.

Since that monumental moment for the company, several underwater stage lift systems have been designed, built and installed into multiple theatres including the City of Dreams theatre, which runs The House of Dancing Water show in Macau. This epic undertaking gained Handling Specialty a spot in the Guinness Book of World Records.

Handling Specialty is the world leader in underwater theatrical spectacles, and is installing systems all over the world. They are also flown to remote vacation locations to provide highly skilled technicians to repair or maintain these multi million-dollar systems efficiently to ensure that the show(s) go on.

This latest win for the company is the accumulation of an almost 20-year relationship designing and building for Royal Caribbean International. “This project began 2.5-years ago with technical sales and conceptual engineering leading the charge to win this prestigious venture,” says Tom Beach, President of Handling Specialty and the lead sales associate on this project. “We cherish our relationship with Royal Caribbean and with a revenue stream via new builds, service, and dry dock overhauls that will last over 10-plus-years, we understand what it takes to keep our customers happy.”

Handling Specialty’s turnkey solutions for Royal Caribbean includes conceptual engineering and contract settlements to full design including all electrical and hydraulic networks, custom stage flooring, installation, training, commissioning and on-going MRO.

“Experience goes a long way in winning a project as large as this,” Beach goes on to say. “Deploying professionals and skilled technicians to Finland over the next 6 years to install our equipment will be a challenge, but we’ve completed similar scenarios many times before.”

In March of 2021, Handling Specialty sent a team of technicians to Barbados where they quarantined on the Allure of the Seas for 14 days, one of the Oasis class of ships, and then performed planned maintenance on the ship’s underwater stage lift equipment. This same group of people went on to Spain where they completed similar work on Harmony of the Seas. Freighting the parts and flying people to these locations during a pandemic and successfully completing the work ahead of schedule is another nod to Handling Specialty’s abilities to organize massive projects and perform the work without interruption. It also speaks to the quality of the people working at Handling Specialty, and the lengths they will go to, to see a job through.

“Having worked together for almost 20 years on our Oasis class ships, I’m thrilled to be partnering with Handling Specialty again.” – Christopher Vlassopulos, Superintendent SLVR & Architectural Lighting for Royal Caribbean International & Celebrity Cruises, says.

The financial impact on the Niagara-based company is a welcome one. Entertainment industry builds have been scarce through the pandemic and to come out the other end with a project of this size is a boost to company moral and another nod to Handling Specialty’s impressive track record designing and building stage lift systems for the entertainment industry.

Beach says of the future, “I feel certain that Handling Specialty will continue our relationship with Royal Caribbean International and international ship yards for decades.”
______________________________________________________________

Since 1963, Handling Specialty has been exclusively dedicated to the custom design and manufacture of your material handling systems & equipment for demanding applications. We are the premier source for made to order lifting, tilting, rotating and traversing equipment for clients seeking innovative solutions, exceptional professional support, world-class credentials and unmatched experience.

Via EPR Network
More Industrial press releases