Chiller Noise No Longer Problem After Acoustifence Barrier Installed

Installation of a 24-foot noise barrier utilizing Acoustifence outdoor sound abatement material at the new Sheboygan Festival Foods store is complete, ending complaints from nearby residents over extreme levels of noise leaking from the store’s industrial refrigeration chillers into the community.

Folks in Sheboygen were celebrating when the popular Wisconsin-based Festival Foods grocery chain opened the 70,000 square foot mega store here on September 16, 2011. Less than two weeks later, the community’s warm welcome had grown icy as neighbors began to complain about noise from the store’s industrial refrigeration chiller that was so loud, it violated the city’s noise ordinance.

Festival Foods enlisted the help of Acoustical Engineer Eric Wolfram of Milwaukee-based Scott R. Riedel & Associates, LTD, who consulted with Acoustiblok’s Jay Boland to choose Acoustifence noise barrier material, a product of Acoustiblok, Inc. of Tampa Florida, to bring the decibel level down below the legal threshold and restore peace and quiet to the neighboring community.

When Wolfram first investigated the site in September, decibel readings ranged between 78.4 and 90.7, loud enough to be a risk for noise-related health problems to nearby residents and workers, had they been subjected to the noise over time. The Sheboygan Department of City Development demanded the level be reduced by at least five decibels, Wolfram said.

“The existing refrigeration pump and motor systems produce extreme noise levels,” Wolfram said. “This noise reverberates within the sheet-metal paneled enclosure interior and escapes through several different exhaust and ventilation openings.

“Additional noise was generated by the cooling and exhaust fans mounted above the enclosure.”

Working with sound consultants from Acoustiblok, Inc., Wolfram designed a two-step solution, creating a barrier with Acoustifence noise deadening material to block noise around the massive system, and incorporating another Acoustiblok product, QuietFiber, to help reduce sound from reflecting off of the taller adjacent building behind the chillers.

Minimal structural changes were required, as the â…›- inch Acoustifence was easily attached to an existing chain link fence and the outdoor-rated QuietFiber with a perforated metal cover was capconed to the building.

The results were better than Wolfram had hoped, with decibel levels reduced to 57.3 the moment the barrier was in place – well below the City’s legal threshold, and more than 20 decibels lower than before the Acoustiblok products were installed. Neighbors are no longer bombarded with the irritating chiller noise, now replaced with the ordinary ambient sounds that existed before.

“Sounds from local traffic and roadways exceeded that of the compressor equipment after installation of the Acoustifence and QuietFiber products,” Wolfram said.

Lahnie Johnson, founder and president of Acoustiblok, Inc., applauded Festival Foods’ quick action in addressing the noise complaints right away, stating that the product combination was the perfect solution for this particular type of noise challenge.

“The Acoustifence and QuietFIber treatments were the perfect solution for the Festival Foods chiller noise, as both of these materials are designed to hold up in inclement weather, and as you can see from the results, they do their job well beyond everyone’s expectations,” Johnson said. “The Acoustifence and Quiet Fiber are also substantially less costly than attempting a structural enclosure solution.”

For more information on industrial noise solutions, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813-980-1400.

Via EPR Network
More Industrial press releases

Acoustiblok Creates Damped, Expandable Acoustical Envelope in New York ITB Recording Studio

Acoustiblok noise abatement material was installed in the nearly completed Artist Workshop Studios recording facility, an in-the-box (ITB) studio designed and built by Artist Workshop Studios owner Tom Donofrio. Acoustiblok was chosen to provide a sound barrier for the small, 12 foot x 12 foot basement studio that could drop decibels levels within the space and provide a neutral acoustical environment for recording.

Donofrio, an electrical engineer, and musician who has built recording studios in the past using different sound deadening materials, chose Acoustiblok for his newest project after consulting with Marilyn Myers of Acoustiblok, Inc., because of its sound damping and noise blocking qualities, as well as its thin, flexible structure that adds no volume to walls within the studio space. Attached to the studs before drywall is hung, Acoustiblok performs without the need to add layers of rigid drywall or modified drywall, a method Donofrio used in the past with mixed results and significant floor space reduction.

“I was looking for a product that would lower the decibels in the studio without taking up any additional space,” Donofrio said. “I was able to achieve the neutral acoustics desired in the space, which makes me extremely happy.

“I didn’t want a sound quality that was too dead or too live, so the Acoustiblok turned out to be an excellent choice.”

Donofrio and a friend were able to hang the 3mm Acoustiblok on the newly framed stud walls within the studio space, including cutouts around a window and electric sockets, and seal the seams according to installation recommendations, all in less than four hours.

The Artist Workshop Studios recording space was built for Donofrio to indulge his own talents as an acoustical guitarist and vocalist, and to be made available to artists on a budget who need an affordable studio with high quality production equipment and the expertise of a seasoned technician to record a song or album.

“Acoustiblok is a perfect choice for establishing sound quality within a sound recording studio like this one,” said Lahnie Johnson, president and founder of Acoustiblok, Inc.

“Unlike additional drywall or other solid rigid materials used for sound reduction, the 1/8-inch heavy, limp Acoustiblok allows the room to be a damped, expandable acoustical envelope. As such, a studio or home theater has less reflection and actually sounds significantly better.”

Via EPR Network
More Industrial press releases

Quiet Fiber® Used to Quiet Industrial Generator Noise at Galleria 360 in Santo Domingo

Installation of 18,000 square feet of non-fiberlass Quiet Fiber® noise abatement material has been completed in the massive generator room of the newly constructed, 750,000 square foot Galleria 360 mall in Santo Domingo.

Quiet Fiber, a product of Acoustiblok, Inc. in Tampa, Florida, was installed on the ceiling and walls of the mall’s generator and substation rooms. These rooms house the industrial emergency generators necessary to keep power running in this coastal area of the Caribbean, plagued by frequent power outages.

The Galleria 360’s industrial generators, installed by Santa Domingo-based Edelca, are a staple in this island republic. Edelca owner Carlos Montos, Edelca consulted with Jay Boland of Acoustiblok, Inc., and used Quiet Fiber on the project after achieving excellent results with Quiet Fiber on a similar project at the La Sirna Superstore in the eastern coastal town of Higuey, Dominican Republic.

“Even though Quiet Fiber is not the least expensive product on the market, I keep coming back to it because the results beat all the competitors’ noise deadening products with double the noise insulating qualities,” Montos said. “The customer on this job wanted to install a double layer of a different product but I convinced him to try the Quiet Fiber.

“I’ve been designing and installing these emergency generators for 20 years, and I have never had the results from other noise abatement products that I have with Quiet Fiber, and now I’m trying to use it everywhere.”

Montos says noise from these industrial generators on which the island has become dependent in order to maintain consistent power is a major problem plaguing businesses and residential property owners when the generators are running. Not only is generator noise bad for business, but its constant drone can cause permanent hearing loss. Another important consideration in the selection of soundproofing material is its fire resistance.

Recently in Santo Domingo a serious fire started in a generator room, and the existing foam sound proofing material was a prime contributor. The fire caused Montos to search for a new fireproof solution. Quiet Fiber is fire resistant even at 2,000 degrees.

“The noise levels are almost unbearable, so you need to have an adequate level of soundproofing in place when they are running,” Montos said. “I always install noise absorbing material wherever I install my generators, and Quiet Fiber is the best soundproofing product we’ve ever used.”

Montos and his crew were able to easily cut the Quiet Fiber to fit around electric conduits, and secured the material to the walls and ceiling with standard insulation stick pins.

The sound deadening qualities of Quiet Fiber will help to protect the mall’s employees, and streams of tourists and local residents from the high volume industrial noise caused by the generators when they are operating.

Lahnie Johnson, president and founder of Acoustiblok, Inc., says that the application of Quiet Fiber in the Galleria 360 generator and substation rooms was exactly what was needed for addressing the high decibel, reverberant sound emanating from the concrete walls.

“Quiet Fiber was designed with this type of hot, humid environment in mind,” Johnson said. “When you’re addressing solid surface noise issues, which in this case with concrete walls, you need a product with proven maximum sound absorption, high temperature rating for fire blocking, and hydrophobic (resistant to moisture).”

Via EPR Network
More Industrial press releases

Tech2select Makes Manufacturing Data Viral

Tech2select is the most advanced technical industry portal for parts and components. It`s focused on detailed manufacturing information to provide a high level matching quality for buyers and suppliers. For suppliers Tech2select provides additional social media services from now on and supports the industry to increase visibility.

So, Tech2select reacts on an US longterm-study about Social Marketing, which shows very significant figures in the industry: 84% of the industry companies mean, that social media is very important for their business. 57% will use videos for their marketing activities in the future.

Tech2select reacts on this trend and provides social media services for suppliers to support them for increasing exposure and traffic. So company and manufacturing data become viral.

From now on company profiles can be shared on Twitter, Facebook and Delicious with a click. Additional the clickrates for the company profiles are published. So, online marketers can navigate and control the social media activities from their Tech2select company profile. For convincing buyers from the industry with additional emotions, marketers can publish a look-and-see video on Tech2select.

www.tech2select.com, www.tech2select.de, www.tech2select.at, www.tech2select.co.uk, office@tech2select.com

Via EPR Network
More Industrial press releases

The Next 4 Billion & SCINET CORPORATION: Worldwide Innovation Impact!

The worldwide and unprecedented impact achieved by SCiNet Corporation & the World Trade System (WTS) is proof that millions of people are ready to fight for life, intelligence and freedom. 72% of the world population is considered ‘poor’, but a recent study prepared by The World Resources Institute reveals that 4.7 billion people have the purchasing power of 3.7 billion euro per day! The title of the report reads ‘The Next 4 Billion’ (the next four billion: business strategy and market).

The report is concerning the population of millions of men and women of Asia, Africa, Eastern Europe, Latin America and the Caribbean, whose income is below poverty level of the western societies, but which in the aggregate represent an extraordinary economic potential.

SCiNet & WTS Corporation is installing new assembly workshops in different regions worldwide, which are included within ‘The Next 4 Billion’, for the mass production of its innovative production mini-plants inside mobile containers. The mobile production mini-plants that are mounted in these assembly workshops are intended for developing countries, offering therein all kinds of products and basic services: from food preparation or household goods, footwear or clothing articles to water purification and primary health care.

The production mini-plants in mobile containers comprise the only system in the world that can supply up to 6 basic necessity articles at a price as low as one dollar per day.

Furthermore, all the assembly plants will operate connected to the World Trade System, a database that provides access to 60 million referrals to merchandise, raw materials, products and services worldwide, through digital certificates for trading.

SCiNet & WTS Corporation: www.scinet-corp.com
SCINET Foundation: www.scfoundation.eu

Via EPR Network
More Industrial press releases

IceTech America, Inc. Is Expanding To A New Location In West Chester, OH

IceTech America, Inc., a world leader in manufacturing high performance Dry Ice Blasting and Dry Ice Production equipment is expanding to a new location in West Chester, OH. The response to growing demand for their blasting machines along with state of the art dry ice production equipment has prompted the move.

“Since expanding to the United States, we have seen growth every year” says Dennis Hjort, President/CEO of IceTech America, Inc. “With our growing presence in North America we have outgrown our current facility. This new facility at 5217 Muhlhauser Road, West Chester, OH will allow us the room we need to hire additional employees, expand our service department and continue to add value for our customers.”

IceTech America, Inc. first opened their doors in April of 2006. With the expansion, IceTech America, Inc. will be more than doubling their campus. “We have our customers to thank for our continued growth”, says Hjort. “We invest a lot of time and resources to build close working relationships with each of our customers, and we are seeing a lot of referrals and repeat business as a result.”

With the new location IceTech America, Inc. will now host a state of the art training and conference center unmatched by any in the industry. “When our customers walk in the door, they will be very impressed” says Mr. Hjort. “The new location will offer an expanded service center along with room to meet our growing demand for more customized and automated solutions.” Automated systems have increased in demand over the last couple of years, and with the new facility IceTech is now capable to offer detailed engineered automated solutions for Dry Ice Blasting to their customers.

IceTech America, Inc. will also continue to stock every part for their blasting machines, and now will carry a complete line of parts needed for their pelletizers to continue to meet their guarantee shipment of parts within 24 hours.

Dry Ice Blasting is rapidly growing as a first choice cleaning method in all industries, from automotive to historical restoration. Dry Ice Blasting offers a non abrasive, non toxic, environmentally friendly cleaning method with zero secondary cleanup involved and no moisture. Dry Ice as a blasting media is approved by the USDA, EPA and FDA. IceTech offers the only line of blasting equipment that is approved and listed by UL.

IceTech America, Inc. has recently launched all new state of the art Dry Ice production equipment that is revolutionizing the industry from older technology to the 21st century. IceTech offers the fastest line of Dry Ice Production equipment in the industry.

IceTech was first founded in 1998 in Denmark. Since inception, IceTech has continued to change the industry while engineering the most versatile line of Dry Ice Blasting equipment and high performance Dry Ice Production equipment. IceTech has supplied equipment to over 180 countries around the world both directly and with their network of over 30 distributors. For more information, please visit www.icetechworld.com.

Via EPR Network
More Industrial press releases

Direct Drive Air Bearing Rotary Tables

IntelLiDrives newly released RTH Series rotary tables combine planar air bearings and RotoLinear motor technologies in the compact, direct drive configuration.

These rotary tables eliminate friction, backlash and the wear problems associated with worm gears and belt driven stages.

Small 1.5” height profile tables manufactured with diameters 4”, 6”, 8” and 12”, operate on air bearings for frictionless, maintenance free operation, and can be supplied with aperture opening through the center.

Torque ranges from 5 to 50 lb*ft, resolution up to 1 arc-sec, repeatability 5 arc-sec, speed up to 200 rpm with unlimited rotation.

Series RT rotary tables are compatible with standard micro stepping indexer/drivers and offer a low cost, compact envelope direct drive rotary positioning systems and can also be supplied with high resolution tape encoders for ultra-precise positioning and closed servo loop operation.

Typical applications include semiconductor assembly equipment, wafer inspection and cutting, fiber-optics alignment, optical applications, precision part indexing and robotics.

Via EPR Network
More Industrial press releases